Hot Dipped Galvanized DIN766 L Grade/G30 Short Link Chain Per Metre
5% discount for lengths greater than 50 metres
DIN766 Windlass Chain – L Grade/G30
L Grade or G30 hot dipped galvanized chain (HDG). All batches of hot dipped galvanised chain are tested in a 30% salt solution (sea water salinity is on average 3.5%) for 72 hours to test for corrosion resistance.
Note: There are two types of 10mm diameter chain. The difference is the length or pitch (either 28mm or 30mm). It is essential the correct chain is matched to the windlass's specifications. DIN766 10mm chain suits all windlasses requiring DIN766 chain.
Proceans DIN766 chain uses a low carbon Q235 steel specifically designed for anchoring applications (same specifications as CMP brand chain).
Why buy Proceans Short Link DIN766 Chain, our chain is quality assured through three different processes:
- Each link is machine calibrated to ensure proper fit for most metric windlasses
- After calibration each link of the chain is passed through a test windless to ensure trouble free, uninterrupted and smooth running
- Every 100 metres of production chain is tested against safe working load limits, see below chart
Please check windlass manufacturer's specification prior to purchase of this chain.
Warnings: Do not exceed Working Load Limit (WLL). Do not use for lifting or hoisting applications.