Catamaran & Multihull Replacement Trampolines

MULTIHULL TRAMPOLINE SOLUTIONS from Whitsunday Discount Marine

Pricing from $900 delivered in approximately 4 weeks.

25% stronger than other French and Australian suppliers.

Replace your worn multihull trampoline/s with the highest quality French manufactured nets by the official suppliers to the shipyards of Beneteau (Lagoon and Excess), Fountaine Pajot, Outremer, Orc, Nautitech, Neel, Balance, MODX etc.

We also manufacture for Leopard, Brix and Seawind.

WE CAN MANUFACTURE ANY MULTIHULL TRAMPOLINE TO YOUR MEASUREMENTS.

Whitsunday Discount Marine facilitates your purchase with minimal correspondance. We assist you through the whole process to ensure your order meets your exact requirements.

OUR TRAMPOLINES ARE AVAILABLE IN THE FOLLOWING SIZES AND COLOURS:

• High density (700gm/m2) polyester netting with 30mm X 30mm mesh with 10mm 3 strand border and bolt rope
  • Colours: white, dark grey and black
• High density (650gm/m2) polyester netting 22mm X 22m mesh with 8mm 3 strand with border and bolt rope
  • Colours: white and black
• High density (800gm/m2) polyester netting 13mm X 13m mesh with 8mm 3 strand bolt rope
  • ​​​​​​​Colours: white and black

All our netting is treated with Ciba Geigy UV stability coating rated to 600 KLY (the measurement of UV stability).

The bolt rope is three strand polyester, overlocked with anti-chafing polyethylene.

The trampolines are made to measure as each multihull's owner has different requirements, such as fixing type (Z lacing or point to point), gap between trampoline edging and the fixing points and experience in attaching the trampoline.

We can also supply rolls of 100 meter X 6mm or cut to length 6mm 8 plait polyester for lacing in either solid white or black.

Click here to read the measuring and installation instructions!

Phone 07 4948 3947 or email office@whitsundaydiscountmarine.com.au to discuss your multihull trampoline replacement.

(TRAMPOLINE)