Proceans cleats are cast from AISI 316 stainless steel and polished to a mirror finish.
They are hard wearing and classically designed to suit the harshest environments.
Each cleat is quality assured from stainless ingot through to finished product.
It is always recommended to thru-bolt cleats using only AISI 316 CSK threads, washers and locking nuts for maximum holding power.
- 125mm cleat use: 4 X CSK M4 bolts
- 150mm cleat use: 4 X CSK M6 bolts
- 200mm cleat use: 4 X CSK M8 bolts
Always pre-fill hole with good quality marine grade silicone before affixing.
The accompanying diagram will assist you assessing the suitability of this cleat.